UART

• Up to 4 sets of UART controller
• 2 Support 2-wire mode
• 2 Support 4-wire mode (HW flow control with CTS/RTS)
• Separate up to 256Byte of TX and 384Byte of RX FIFOs
• Programmable FIFO disabling for 1-byte depth
• Programmable baud rate generator supports up to 3Mbps
• Support DMA access for TX and RX channel
• Standard asynchronous communication bits (start, stop and parity)
• Independent masking of transmit FIFO, receive FIFO, receive timeout, modem status, and error condition interrupts
• False start bit detection
• Line break generation and detection
• Programmable hardware flow control
• Fully-programmable serial interface characteristics
• Support 115200 baud rate