Jump to main content

VisionFive Single Board Computer Quick Start Guide Version: V1.1 Date: 2022/03/01 Doc ID: VisionFive-QSGEN-001-V1.1

Home
Appendix C: Recovering the Bootloader
Hardware Setup

Legal Statements
Important legal notice before reading our documentation.
Preface
About this guide and technical support information.
Features and Specifications
Hardware Overview
Getting Started
Appendix A: VisionFive Boot Flow
Appendix B: Updating Firmware and u-boot
Appendix C: Recovering the Bootloader
- Hardware Setup
- Software Setup
Appendix D: GitHub Repository

Hardware Setup

Connect the jumper wires between the USB-to-Serial converter and the DEBUG header of the VisionFive as follows.

Figure 1. Connecting the Debug Header

© 2022 Sponsored by StarFive Technology . All rights reserved.