Power on and power off

This section provides the methods to power on and power off the JH-7110 DevKit.

Power on

  1. Connect the 12V power supply to ⑧ port in Top View of the Block diagram.
  2. Then turn the ⑨ to ON in Top View of the Block diagram.
  3. Finally, press the ⑪ button in Top View of the Block diagram for 1 second until the red indicator light on the Core Board lights up, which means the JH-7110 DevKit is powered on.

Power off

The following provides two methods to power off the JH-7110 DevKit.
  • Press the ⑪ button for 6 seconds until the red indicator light on the Core Board turns off.
  • Turn the ⑨ to OFF directly to power off the JH-7110 DevKit.