Feature Overview

Key Features

VisionFive 2 provides the following key features:

Table 1. VisionFive 2 Key Features
Component Details
Processor
  • StarFive JH7110 with RISC-V quad-core CPU with 2 MB L2 cache and a monitor core, supporting RV64GC ISA, working up to 1.5 GHz
  • IMG BXE-4-32 MC1 with work frequency up to 600 MHz
Memory VisionFive 2 provides the system memory of 2 GB, 4 GB, or 8 GB LPDDR4 SDRAM up to 2,800 Mbps.
Storage
  • Onboard TF card slot: VisionFive 2 can boot from the TF card.
  • Flash: The firmware to store U-Boot and bootloader.
Video Processing
  • Video decoder supports up to 4K@60fps and multi-stream for H264/H265
  • Video encoder supports up to 1080p@30fps and multi-stream for H265
  • JPEG encoder/decoder
Interface
  • 1 × 2-lane MIPI DSI
  • 1 × 4-lane MIPI DSI
  • 1 × 2-lane MIPI CSI
  • 1 × 3.5 mm Audio Jack
  • 1 × USB-C port for charging
  • 1 × USB device port (by reusing the USB-C port)
  • 4 × USB 3.0 ports (multiplexed with a PCIe 2.0 1x lane)
  • 1 × HDMI 2.0
  • 2 × RJ45 Ethernet ports
  • 1 × 4-pin PoE header
  • 1 × 2-pin fan header
  • 1 × Reset button
  • 1 × 40-pin GPIO header, supporting various interface options:
    • 3.3 V (on 2 pins)
    • 5 V (on 2 pins)
    • Ground (on 8 pins)
    • GPIO
    • CAN bus
    • DMIC
    • I2C
    • I2S
    • PWM
    • SPI
    • UART
    • ...
Software VisionFive 2 supports the Debian, OpenHarmony, Ubuntu, OpenSUSE, OpenKylin, OpenEuler, Deepin and other software running on theses operating systems.

Block Diagram

The following figure displays the block diagrams of VisionFive 2.

Figure 1. VisionFive 2 Block Diagram - Top View
Figure 2. VisionFive 2 Block Diagram - Bottom View

Board Appearance

Figure 3. Board Appearance (Top View)
Figure 4. Board Appearance (Bottom View)
Table 2. Board Appearance Description
No. Description No. Description
1 StarFive JH-7110 with RISC-V quad-core CPU, supporting RV64GC ISA 14 2 × Ethernet Ports (RJ45)
2 PoE Header 15 HDMI 2.0 Port
3 Boot Mode Pins 16 3.5 mm Audio Jack
4 40-Pin GPIO Header 17 2 × USB 3.0 Port
5 2 GB/4 GB/8 GB LPDDR4 SDRAM 18 2 × USB 3.0 Port
6 Reset Button 19 4-Lane MIPI DSI
7 EEPROM 20 USB 3.0 Host Controller
8 USB-C Port, supporting both charging and data transmission 21 2-Lane MIPI DSI
9 2-Lane MIPI CSI 22 eMMC Socket
10 PMIC 23 TF Card Slot
11 2-Pin Fan Header 24 QSPI Flash
12 GMAC0 PHY 25 M.2 M-Key
13 GMAC1 PHY - -