VisionFive 2 Boot Configuration

VisionFive 2 provides pins to determine the boot mode before it is powered up.
Table 1. Boot Mode Settings
Index Boot Mode RGPIO_1 RGPIO_0
1 1-bit QSPI Nor Flash 0 (L) 0 (L)
2 SDIO3.0 0 (L) 1(H)
3 eMMC 1 (H) 0 (L)
4 UART 1 (H) 1 (H)
Note: StarFive recommends using QSPI NOR Flash mode (Index 1) for standard operation.

The following figure displays the location and the pin definitions of the boot mode settings.

Figure 1. Boot Mode Setting Location
Figure 2. Boot Mode Settings